Monday, October 7, 2013

Asha 303 Handsfree Activated Problem Solution

In this article I will explain Solutions of Nokia Asha 303 Handsfree

Activated problem. If your phone is suffering from this problem your

Nokia Asha 303 will stop using it's Speaker and Microphone. Because

phone will be directing all audio to handsfree connector. So if your

phone shows a headphone sign on screen and it's earpiece and mic stops

working don't panic there is a moderately simple solution. I will

explain every step and post the diagram below.



Clean The Area around Handsfree Connector on Motherboard

Remove Purple Marked IC and make the Jumpers

Replace the black marked Crystal IC

Clean The Area:



First of all you should clean the area around the Handsfree Connector

of the motherboard because almost 60% of handsfree problems occur

because of Shortage, Moisture or Carbon not just Nokia Asha 303 but

most of the Cell Phones. So there is a strong chance your problem will

be solved by just cleaning it. I have marked the general area with RED

border line.



Remove IC and Jumper:



If cleaning doesn't work Remove the IC I have marked in PURPLE and

jumper it's left and right points as shown in the diagram below.



Replace the IC:



If cleaning and Jumper both don't work you can replace the IC I have

marked in BLACK your problem will be most likely solved.



Please Note that we will edit these solutions or add new ones if found

in this page at any time in the future. So feel free to come back any

time on this page to stay up to date.





If you have further Questions please don't hesitate to leave a comment.



Note: Every repairing solution posted here is tested by at least one

member of our team. Use the information available here at Your Own

Risk. We are not responsible if any harm comes to your device during

the repairing process.

No comments:

Post a Comment